Европейская академия
естественных наук

Hannover E.V.

 

 

Научные труды.


Л.Д. Шалыгин., Безалкогольные напитки в медицине и быту

Марк Гринштейн, Информационно-волновая медицина (Жизнь без лекарств)

В. В. Салмин, С. А. Ишков, О. Л. Старинова; “Методы решения вариационных задач механики космического полета с малой тягой” - Монография

J. B. Ulanovsky Hydrogen diffusion and porosity formation in aluminum

 

Л.Д. Шалыгин., Безалкогольные напитки в медицине и быту. – М.:РАЕН, 2014

Книга знакомит читателей с безалкогольными напитками, которые активно применяются в медицине и быту. С современных позиций представлена роль воды в питании человека, изложены физиологические основы баланса воды в организме и факторы на него влияющие. Описываются продукты, используемые для изготовления напитков, излагаются процессы их приготовления и правила подачи. Подробно представлены сведения о соках и их видах, дана характеристика свежих травяных, овощных и фруктово-ягодных соков. Особое внимание обращено в монографии на соколечение, описаны его принципы, показания, противопоказания и схемы применения соков при лечении различных заболеваний, представлено лечебное голодание соками, а также очищение толстого кишечника, лимфатической системы и всего организма с помощью соков, которые можно проводить не только в условиях клиники, но и в домашних условиях. Особое место в книге отводится ампелотерапии – лечению виноградом, в том числе виноградным сокам, подробно изложены исторические аспекты виноградолечения, показания и противопоказания к применению ампелотерапии в клинической практике, общие принципы организации, методика проведения и оценка эффективности лечения виноградом, в том числе виноградным соком.

В книге достаточно широко представлены сиропы и их виды, описаны в полном объеме холодные и горячие напитки, которые часто используются в медицинской практике и в быту, дано большое количество рецептов их приготовления.

Монография знакомит читателей с минеральными питьевыми водами и газированными напитками. С современных позиций описано питьевое лечение минеральными водами, дана их классификация, представлены физиологические основы лечебного действия минеральных вод, их лечебные эффекты, показания, противопоказания и методики применения при различных заболеваниях у человека. В книге представлены сведения о безалкогольном вине и пиве, с медицинской точки зрения читателю разъясняется вред и польза их употребления для здоровья человека. Кроме того, в монографии впервые изложены данные о жидком безалкогольном концентрате полифенолов винограда «Эноанте», представлены физиологические аспекты его лечебного действия, результаты клинических испытаний, показания и дозировки его применения в медицинской практике для лечения различных видов патологии, а также в быту для сохранения, укрепления здоровья и продления активного долголетия.

Скачать монографию

 

Марк Гринштейн, Информационно-волновая медицина (Жизнь без лекарств). - Lambert, 2015.

Марк Гринштейн, Информационно-волновая медицина (Жизнь без лекарств) Lambert-2015.


Скачать информацию о книге

 

Аннотация монографии

В. В. Салмин, С. А. Ишков, О. Л. Старинова; Методы решения вариационных задач механики космического полета с малой тягой

 

В настоящее время механика космического полета с малой тягой выделилась, по существу, в новый раздел механики космического полета, рассматривающий в совокупности проблемы оптимизации траекторий и законов управления движением, а также выбора оптимальных соотношений масс основных компонентов космического аппарата (космического аппарата) с электрореактивным двигателем. Физические и технические основы электрореактивных двигателей широко освещены в специальной литературе. К настоящему времени в России, (а ранее в СССР) и ряде других стран – США, Германии, Франции, Англии созданы и испытаны серийные образцы двигателей, которые активно используются в космическом пространстве для решения целого ряда практических задач космонавтики. В основном электрореактивные двигатели использовались в околоземном космосе для управления орбитами спутников Земли. Источником энергии для электрореактивных двигателей служат солнечная или (в перспективе) ядерная энергетическая установка.

Космические эксперименты последнего десятилетия показали хорошее соответствие расчетно-теоретических и экспериментальных характеристик электрореактивных двигателей, показали пути дальнейшего повышения их эффективности и возможность создания перспективных космических аппаратов, целиком ориентированных на использование электрореактивных двигательных установок.

Главное направление теоретических исследований в области динамики космических перелетов с малой тягой заключается в развитии аналитических и численных методов решения вариационных задач для поиска оптимальных траекторий. В последнее время большее значение приобретают вопросы, связанные с учетом дополнительных факторов в математических моделях движения космических аппаратов, а также дополнительных ограничений на возможности управления двигательной установкой.

Скачать абстракт монографии на русском (pdf)

Download abstract on English

 

вверх

J.B. Ulanovsky - Hydrogen diffusion and porosity formation in aluminumJ.B. Ulanovsky - Hydrogen diffusion and porosity formation in aluminum

Abstract from the monograph by J. B. Ulanovsky "Hydrogen diffusion and porosity formation in aluminum"

The author wrote this book in early 1970s, during his career in Soviet defense industry. At the time, scientific community had a limited access to research reports due to secrecy policies enforced by the USSR government.

Today there are no such restrictions and this is essential not only for confirming the author’s priority regarding a number of inventions, but also because his findings are of practical importance.

The author’s priority inventions include the following:

The achieved application results include the determination of the porosity-inhibiting hydrogen content in semi-finished products made from aluminium alloys.

Reference values:

Chapter 1 covers the solubility of hydrogen in solid aluminium and aluminium alloys. In order to determine the solubility of hydrogen, we suggested a new methodology using a mass spectrometer IPDO-1 with parallel connection of mass spectrometer sensor to the pumping system. Using this analyzer and conducting analysis while continuously pumping out gases emitted from samples, allowed us to substantially improve the accuracy and efficiency of this method. This book also offers a new methodology of determining hydrogen content in aluminum alloys including components with high vapor pressure; there is also a comparison of our results with relevant reports by other authors.

This new technique was used to research processes of hydrogen diffusion in aluminium (Chapter 2). We have determined the temperature dependence of hydrogen diffusion coefficient in aluminum and its alloys; also, the activation energy of this process was calculated.

Chapter 3 dwells on issues related to diffusion of hydrogen in the system of aluminum / aluminum oxide. Our findings allowed us to conclude that aluminum oxide contained in aluminum affects the process of gas porosity development in ambiguous manner. On the one hand, the surface of oxide particle may become a nucleus of a gas defect and thus enhance the growth of gas defects. On the other hand, the introduction of oxide particles slows down the rate of hydrogen movement within metal and consequently slows down the growth of gas defects. We obtained data on hydrogen diffusion in heterophase system of aluminum / aluminum oxide in the temperature range 500  600 С at the oxide content up to 0.76% of the mass. We have demonstrated that aluminum oxide dramatically reduces effective diffusivity of hydrogen in aluminum.

Hydrogen permeability (Chapter 4) is one of the most important characteristics of the interaction between hydrogen and metal. The first study of the hydrogen permeability was conducted in 1935. Nevertheless, even today it is a challenge to obtain reliable results on hydrogen permeability of aluminum. Chapter 4 is dedicated to the author’s new methodology allowing to study the hydrogen permeability of aluminum at temperatures below 350 С. The need to develop such methodology was dictated by difficult measurement of hydrogen permeability, which sharply decreases at lower temperatures, by using traditional techniques. We determined the dependence of hydrogen permeability on the temperature-pressure of hydrogen and studied the influence of preliminary high-temperature annealing (T = 500 С) on the hydrogen permeability of aluminum.

Chapter 5 presents the results of our study of aluminum degassing at annealing in the open air and in inert atmosphere. This chapter explains the temperature dependence of the constant of the rate of total degassing process and activation energy value.

Gas-static pressing technique is presented in Chapter 6. This new method was developed in order to accelerate the degassing process and eliminate porosity. This is achieved by annealing under pressure for a time sufficient to obtain the desired degree of degassing and eliminate porosity. Such environment absorbs the gases released from metal. Compared to the annealing of samples in dry air atmosphere, the use of this technique helps reduce the time for complete removal of hydrogen by a factor of 20, at the same temperature.

Chapters 7 and 8 present a theory of development of gas porosity in metals comprising a quantitative treatment of the kinetics of defects growth and its comparison with experimental data. It is assumed that the development of gas porosity in heated metal is driven by a tendency to establish thermodynamic equilibrium between the gas dissolved in the metal lattice and the gas in pores; and the growth process is limited by diffusion of dissolved gas towards their surface.

Each annealing temperature corresponds to a critical pressure of the gas in the pores, which depends on ductility properties of the metal. Exceeding pressure causes an increase of pore volume.

The comparison of theoretical and experimental data concerning the development of porosity in aluminum has corroborated our theory assumptions.

We defined hydrogen pressure in the pores and critical hydrogen concentration below which no porosity is formed in aluminum.

Our research data allowed to give some practical recommendations on how to remove hydrogen and eliminate gas defects in semi-finished products made from aluminium alloys and proposed adjustments to the process of manufacturing large-sized aluminum alloy sheets, resulting in a double reduction of bubble defects (Chapter 9).

Chapter 10 describes a new way of measuring surface tension of solid metals. It was invented in order to increase accuracy and efficiency of analysis, thus allowing to expand the temperature range.

 

вверх

 

 ¦  Impressum  ¦  Контакт